This is a simple to use all in one, self install alarm system. You simply stick the contacts/sensors etc where you wish. The unit can be mouned inside or outside. Just plug it in in and it is then ready to go. It is that simple.
USER’S MANUAL FOR SECUREYOURHOME.IE’S ALL-IN-ONE DESIGN WIRELESS ALARM.
All in one CONTROL PANEL, SIREN AND STROBE LIGHT, operated by a fob.
Alarm volume = 120 Decibel.
Easily operated. Simply use the arm, disarm or emergency sos buttons on the fob.
Radio receiving frequency: 315/433 Mhz.
When the alarm is triggered it will sound and flash.
6 to 8 hour emergency backup battery.
HOW TO CONNECT ACCESSORIES.
If you wish to add more door/window contacts, PIR sensors smoke or carbon monoxide detectors, up to a total of 20 pieces please follow the following directions.
Plug in the alarm/control panel. You will hear a beep.
There is a small hole at the back of the device. In that hole, you will see a small black button. You will need to insert a small screwdriver and gently press the button until you hear a long beep. This tells you it is ready to accept an accessory. Now trigger the accessory e.g. separate the contacts, turn on the PIR sensor or press a button on the new fob. You can connect up to three accessories at a time. Press the black button again to save the setting. Repeat for each accessory you wish to add.
HOW TO USE THE REMOTE CONTROL FOB.
Press arm to turn on the alarm.
Press disarm to turn off the alarm
In case of an emergency press the SOS button to instantly trigger the alarm.
Door and window contacts.
PIR Motion detectors.
Carbon monoxide, LPG, etc. detector.